TCT circular saw blades 1 페이지

본문 바로가기
사이트 내 전체검색

TCT circular saw blades

PRODUCTS

We will do our best to preserve the credibility of our customers.

TCT circular saw blades

DCM has developed Tungsten Carbide Tip Saw Blades suitable for various industries by using carbide (HM) and cermet tips. It has been researched and developed and produced. It is classified into 11 products according to the cutting material and use environment. Depending on the mechanical properties, cutting parameters, and the application used, the shape and material of the saw blade are designed to meet customer requirements.

Cutting conditions may vary depending on the cutting material and mechanical properties, in order to apply optimal cutting conditions Testing is a must.
  • 11
    • 1
    • QTM STS 2.0
    QTM STS 2.0 is characterized by excellent wear resistance, long tool life, and high precision for smooth cutting. It is possible to improve the working environment with low noise and realize cost reduction with high performance cutting quality.
    Surface treatment
    Not available
    Application
    Carbon and alloy steel rods
    Cutting Parameter
    Vc : 70~130m/min fz : 0.04~0.08㎜/T
  • 10
    • 2
    • QTM SUS 2.0
    QTM SUS 2.0 is a saw blade suitable for stainless steel classified as a difficult-to-cut material. It has the advantage of improving the heat resistance and abrasion resistance with PVD coating of 2~3㎛, and reducing the cutting load with a precise tooth structure to obtain optimal surface roughness.
    Surface treatment
    High quality PVD coating
    Application
    SUS304, SUS316 BILLETS
    Cutting Parameter
    Vc : 50~100m/min fz : 0.04~0.06㎜/T
  • 9
    • 3
    • QTM STT 2.0
    QTM STT 2.0 is a saw blade suitable for cutting steel pipes. It is designed to minimize breakage by chips inside the pipe and reduce vibration to ensure long life.
    Surface treatment
    Not available
    Application
    Carbon and alloy steel pipes
    Cutting Parameter
    Vc : 100~150m/min fz : 0.03~0.09㎜/T
  • 8
    • 4
    • QTM SUT 2.0
    QTM SUT 2.0 is designed for easy chip evacuation with a saw blade for cutting stainless steel pipes, reducing cutting loads and improving cutting quality with precision machining for excellent surface finish. PVD Coating increases the heat resistance and wear resistance to extend the life of the tool.
    Surface treatment
    High quality PVD coating
    Application
    Stainless steel pipe, duplex pipe
    Cutting Parameter
    Vc : 50~70m/min fz : 0.03~0.06㎜/T
  • 7
    • 5
    • QTM STP 2.0
    QTM STP 2.0 is the saw blade for cutting steel sheet can reduce the heat build-up, fatigue and cutting load of the saw blade due to continuous cutting operations, thereby increasing the service life and improving the cutting surface roughness to reduce the cost for secondary machining.
    Surface treatment
    Not available
    Application
    Carbon steel, alloy steel, mold steel sheet
    Cutting Parameter
    Vc : 70~130m/min fz : 0.03~0.1㎜/T
  • 6
    • 6
    • QTM SUP 2.0
    QTM SUP 2.0 is a product that improves the tool life by increasing the stiffness of the saw by cutting PVD with a saw blade for cutting stainless steel plates and minimizing the material fusion phenomenon that occurs when cutting stainless steel. 
    Surface treatment
    High quality PVD coating
    Application
    Stainless sheet
    Cutting Parameter
    Vc : 50~70m/min fz : 0.03~0.06㎜/T
  • 5
    • 7
    • QTS-P
    QTS-P is a saw blade designed to improve heat resistance and wear resistance by applying PVD coating with a flying saw used for pipe line, and to minimize blade damage due to chips inside the pipe.
    Surface treatment
    High quality PVD coating
    Application
    Carbon steel pipe, stainless steel
    Cutting Parameter
    Vc : 170~500m/min fz : 0.03~0.2㎜/T
  • 4
    • 8
    • QTS-P Bead
    QTS-P Bead is a flying saw used for tube milling line to improve heat resistance and abrasion resistance via PVD coating. It is developed to remove the pipe inner beads readily.
    Surface treatment
    High quality PVD coating
    Application
    Carbon steel pipe, Stainless
    Cutting Parameter
    Vc : 300~500m/min fz : 0.03~0.08㎜/T
  • 3
    • 9
    • QTS-P Orbital
    QTS-P Orbital is used in pipe making facilities and is a saw blade that cuts along the outer track of the pipe in such a way that two or four saws cut simultaneously. It is a saw blade that improves heat resistance and wear resistance by PVD coating.
    Surface treatment
    High quality PVD coating
    Application
    Carbon steel pipe, stainless steel pipe
    Cutting Parameter
    Vc : 350~600m/min fz : 0.04~0.12㎜/T
  • 2
    • 10
    • QTS-D

    QTS-D has a vigorous cutting ability in adverse conditions.

    It frequently sets to continuous impulse, lubricant-free and manual cutting circumstances.

    Surface treatment
    Not available
    Application
    low carbon steel pipe, profile and various shapes of steels
    Cutting Parameter
    Vc : 1000 ~ 1200 m/min fz : 0.01~0.06㎜/T
  • 1
    • 11
    • QTS-EP

    The maximum production diameter of DCM TCT Saw Blade is 2,200mm. We analyze mechanical cutting conditions and cutting materials according to customer requirements, and design optimal geometries to provide customized saw blades.

    Special specifications that are not in the standard specifications can also be produced.

    Surface treatment
    Applied according to customer order
    Application
    Applied according to customer order
    Cutting Parameter
    Applied according to customer order

DUCK MYUNG Co., LTD.CEO : Young-moon AhnBusiness registration number : 130-81-60104E-Mail : duckmyung-co@hanmail.net The head office : 27, Emtibeuibuk-ro 193beon-gil, Siheung-si, Gyeonggi-do, Republic of KoreaTEL: +82-31-831-3883 FAX: +82-31-365-4229 1st factory : 110-50, Hyojagak-ro, Seosin-myeon, Hwaseong-si, Gyeonggi-do, Republic of KoreaTEL: +82-31-831-3883 FAX: +82-31-831-3882 2nd factory : 41-8, Gatdwidongnyeok-gil, Gyeongju-si, Gyeongsangbuk-do, Republic of KoreaTEL : +82-54-776-1271 FAX : +82-54-776-1273

DUCK MYUNG Co., LTD.CEO : Young-moon Ahn
Business registration number : 130-81-60104
E-Mail : duckmyung-co@hanmail.net The head office : 27, Emtibeuibuk-ro 193beon-gil, Siheung-si, Gyeonggi-do, Republic of Korea
TEL: +82-31-831-3883 FAX: +82-31-365-4229
1st factory : 110-50, Hyojagak-ro, Seosin-myeon, Hwaseong-si, Gyeonggi-do, Republic of Korea
TEL: +82-31-831-3883 FAX: +82-31-831-3882
2nd factory : 41-8, Gatdwidongnyeok-gil, Gyeongju-si, Gyeongsangbuk-do, Republic of Korea
TEL : +82-54-776-1271 FAX : +82-54-776-1273

Copyright © DCM. All Rights Reserved.